19 Aug

tutorial – knitting colorwork tips

Colorwork tips - a tutorial by La Visch Designs

Knitting colorwork besides giving a gorgeous result is also a lot of fun. I must admit I haven’t gone beyond knitting colorwork with 2 colors yet, at this point in time. Doing that though, I have come across some things that make it easier to do and get a lovely result. And, of course, I love to share these colorwork tips with you!

1. Picking your colors

Perhaps you’ve already noticed it with previous projects: sometimes when colors seem to go perfectly with each other, the result is just disappointing when combined. One possible reason for this is that the colors don’t have enough contrast between them. But how to make sure there is enough contrast? Read on this tutorial!

Contrast in colorwork - a tutorial by La Visch Designs

2. Start with a small project

Handling multiple strands of yarn at the same time while following a chart can be pretty daunting if you’ve never done so before. My advice would, therefore, be to start with a smallish project and limit yourself to only 2 colors. Think for example of a hat, like the Pijl hat pictured below.  This way you can find out how to hold your yarn etc. without adding an extreme tangle to the mix that even more colors of yarn could potentially bring.

Pijl - a design by La Visch Designs

3. Managing floats

The pieces of yarn running at the inside of a colorwork project knitted in the round are called “floats”: the lengths of yarn not being knitted and simply carried along the back.  Because they run at the inside circumference of the project, there is a risk of them getting too short and tight. This, in turn, will lead to puckering in the finished item. The solution is luckily a very easy one: just turn your knitting inside-out so the floats are on the outside circumference while knitting! This will usually give enough slack in the floats to avoid puckering. This is, by the way, a pic of my Bloem hat while in progress.

Colorwork tips - by La Visch Designs

4. Gauge

Most knitters find that when knitting colorwork their gauge ends up much tighter (more stitches per 10 cm / 4 inches) than when knitting in a single color with that particular yarn/needle combination. This is because the floats lack the elasticity of regular knitting stitches. This may mean that a colorwork hat, sweater or sock turns out much smaller than expected.  It’s therefor a good idea to either start with a smallish part of the project like a sleeve (for a big project like a sweater) or swatch. Don’t forget to swatch in the round though, because this is usually different from the gauge when worked flat.

5. Fixing mistakes

Let’s face it: mistakes will probably be made. I know I do! With some, you can just tink back (= knitting backward, in other words: stitch for stitch un-knitting what you did). In that case, make sure to wind back your yarn on the separate balls to avoid it all tangling up. It’s also possible to find a bit in your colorwork that didn’t quite go according to the chart, way back or even after binding off. In that case, there are several options. You can, of course, consider it a design element. if it bothers you too much, don’t be hesitant to fix it for the eye by embroidering over it using the duplicate stitch technique. And I’ve got a tutorial for that!

duplicate stitch_4

There you have it: several colorwork tips to help you with working lovely colorwork projects!

Patreon logo

Thanks to my Patreon supporters for bringing you this freebie! Creating quality patterns and tutorials is a lot of work and resource-intensive. However, I find it important to give you free content like this tutorial. Thanks to the generous support of my Patreon supporters I can make it happen. Thank you, patrons! Click here to join, or click here to read more about La Visch Designs on Patreon.

28 Dec

pijl hat

Pijl Hat - a design by La Visch Designs

The Pijl hat is a lovely unisex hat with stranded color work. With only two colors, this hat knits up super quick. Due to the simple colorwork design, it is also a great first stranded project for anyone who has never attempted this technique before.

This pattern contains instructions for a whopping 9 sizes, ranging from Preemie to Adult Large. The Pijl hat is knit completely seamless and from the bottom up. The color work pattern for the body of the hat is in charted form only. All other instructions are in written form.

Price: € 4,90 add to basket

Create your own Ebook! Purchase any 4 patterns and receive the 5th one for free. No code necessary, just put 5 patterns in your cart and the price of the lowest priced pattern will be automatically deducted from the total.

Difficulty level
Stitches used include k, p, k2tog and the M1 increase. This pattern is suitable for the intermediate knitter.

Size and finished measurements
Preemie (Newborn, 6M Baby, 12M Baby, Toddler) {Child, S, M, L} with resulting circumference of approx. 29 (36.5, 40, 43.5, 47.5) {51, 54.5, 54.5, 58} cm (11 ¾ (14 ½, 16, 17 ½, 19) {20 ¼, 21 ¾, 21 ¾, 23 ¼} inches) in the body of the hat.

When choosing your hat size, take 2.5-5 cm (1-2 inches) of negative ease into account.

Pattern details

  • Gauge: 22 sts / 24 rounds = 10 cm (4 inches) over stranded stockinette on larger needles.
  • Pattern languages included: English and Dutch (Dit patroon omvat zowel een Nederlandse als een Engelse versie).
  • Digital PDF has 4 pages (letter size).


  • Yarn: GGH Maxima [100% merino wool; 111 m (121 yds) / 50 g] in 2 colors:
    MC: 33 (52, 65, 77, 85) {106, 121, 138, 155} m (36 (56, 70, 85, 93) {114, 132, 150, 169} yds) – green in sample.
    CC: 22 (51, 56, 62, 67) {71, 113, 113, 120} m (24 (56, 61, 68, 73) {77, 123, 123, 131} yds) – blue in sample.
    Substitute any DK weight yarn for a similar result.
  • Knitting needles in your preferred style for small circumference knitting in the round in the following sizes (or to match gauge): Size 3.5 mm (US #4) and size 4 mm (US #6)
  • Yarn needle
  • 7 stitch markers
  • 1 differently colored end-of-round stitch marker