design

green madeira

Green Madeira shawl

Green Madeira is a semi-circle Pi shawl, designed for the gorgeous gradient yarn used. While I made my version in a mohair type yarn, any worsted weight gradient yarn would make a lovely shawl with this design!

Work this shawl from the top-down, starting with a garter stitch tab. The instructions for the lace are, of course, both charted and fully written out.


Pay what you want: (minimum €6.50)

Add to cart


Difficulty level

The half-circle Green Madeira shawl is knit from the top down and is started with a garter tab cast-on. Lace patterning is worked on both RS and WS rows. Stitches used include knit, purl, yo, m1, skp, k2tog, and p2tog. This pattern is suitable for the intermediate knitter.

Size and finished measurements

Finished dimensions of the sample shawl: span width of 172 cm (67 ¾ inches) and a depth of 63 cm (24 ¾ inches), measured after blocking.

Pattern details

  • Gauge: Gauge is not critical in this design. For the sample shawl: 11 sts / 24 rows = 10 cm (4 inches) over stockinette, knitted on smaller needles and measured after blocking.
  • Pattern languages included: English and Dutch (Dit patroon omvat zowel een Nederlandse als een Engelse versie)
  • Digital PDF has 4 pages (letter size)

Materials

  • Yarn: 420 m (459 yds)/ 150 g Pro Lana Woolly Hugs Bobbel Mohair (45% Acrylic, 40% Nylon, 15% Mohair; 420 m (459 yds)/ 150 g) in “203 Green”. Substitute any worsted weight mohair-type yarn with long color changes for a similar result.
  • Size 5 mm (US 8) / 80 cm (32 inches) circular needles
  • Size 5.5 mm (US 9) knitting needle (for bind-off only).
  • Yarn needle
  • Stitch markers to use in between lace repeats (optional)

green madeira Read More »

tangerine tango

Tangerine Tango shawl

Tangerine Tango is a stylish triangular shawl knit sideways on the bias. The combination of striped garter stitch and lace makes it a perfect choice for those colors of fingering weight yarn that combine so well. With its generous size of 177 cm (69 ¾ inches) along the upper edge and a depth of 63 cm (24 ¾ inches), it is perfect to wear as an elegant scarf.

This pattern contains both fully written out as well as charted instructions for the lace section. The lace in the border is worked on both right side and wrong side rows. The shawl can be made larger by adding more repeats of the striped garter stitch section and/or by working more repeats of the lace section.


Pay what you want: (minimum €6.50)

Add to cart


Difficulty level

The lace in this pattern is worked on both RS and WS rows. Stitches used include knit, purl, yo, k2tog, p2tog, kfb and versions of these stitches knitted through the back loop. This pattern is suitable for the intermediate to advanced knitter.

Sizes and finished measurements

Finished dimensions of the sample shawl: 177 cm (69 ¾ inches) along the upper edge and a depth of 63 cm (24 ¾ inches), measured after blocking.

Pattern details

  • Tangerine Tango is written for a gauge of approx. 18 sts / 26 rows = 10 cm (4 inches) over garter stitch, measured after blocking. Gauge is however not critical in this design.
  • Pattern languages included: English and Dutch (Dit patroon omvat zowel een Nederlandse als een Engelse versie)
  • Digital PDF has 4 pages (letter size)

Materials

  • Yarn: MC: 420 m (460 yds) / 100 g Wools of Holland Kempische Sokkenwol (75% Wool, 25% Nylon; 210 m (230 yds) / 50 g) in Sky Blue.
    CC: 210 m (230 yds) / 50 g Wollträume Traumsterne Sockenwolle (75% Wool, 25% Nylon; 210 m (230 yds) / 50 g) in Orange.
    Substitute any fingering weight yarn for a similar result.
  • Size 4 mm (US 6) / 80 cm (32 inches) circular needles
  • Yarn needle
  • 2 stitch markers to indicate the 3 edge stitches on each side (optional)
  • 19 stitch markers (optional) to mark the repeats of the lace pattern

tangerine tango Read More »

pijl hat

Pijl hat

The Pijl hat is a lovely unisex hat with stranded color work. With only two colors, this hat knits up super quick. Due to the simple colorwork design, it is also a great first stranded project for anyone who has never attempted this technique before.

This pattern contains instructions for a whopping 9 sizes, ranging from Preemie to Adult Large. The Pijl hat is knit completely seamless and from the bottom up. The color work pattern for the body of the hat is in charted form only. All other instructions are in written form.


Pay what you want: (minimum €4.90)

Add to cart


Difficulty level

Stitches used include k, p, k2tog and the M1 increase. This pattern is suitable for the intermediate knitter.

Size and finished measurements

Preemie (Newborn, 6M Baby, 12M Baby, Toddler) {Child, S, M, L} with resulting circumference of approx. 29 (36.5, 40, 43.5, 47.5) {51, 54.5, 54.5, 58} cm (11 ¾ (14 ½, 16, 17 ½, 19) {20 ¼, 21 ¾, 21 ¾, 23 ¼} inches) in the body of the hat.

When choosing your hat size, take 2.5-5 cm (1-2 inches) of negative ease into account.

Pattern details

  • Gauge: 22 sts / 24 rounds = 10 cm (4 inches) over stranded stockinette on larger needles.
  • Pattern languages included: English and Dutch (Dit patroon omvat zowel een Nederlandse als een Engelse versie).
  • Digital PDF has 4 pages (letter size).

Materials

  • Yarn: GGH Maxima [100% merino wool; 111 m (121 yds) / 50 g] in 2 colors:
    MC: 33 (52, 65, 77, 85) {106, 121, 138, 155} m (36 (56, 70, 85, 93) {114, 132, 150, 169} yds) – green in sample.
    CC: 22 (51, 56, 62, 67) {71, 113, 113, 120} m (24 (56, 61, 68, 73) {77, 123, 123, 131} yds) – blue in sample.
    Substitute any DK weight yarn for a similar result.
  • Knitting needles in your preferred style for small circumference knitting in the round in the following sizes (or to match gauge): Size 3.5 mm (US 4) and size 4 mm (US 6)
  • Yarn needle
  • 7 stitch markers
  • 1 differently colored end-of-round stitch marker

pijl hat Read More »

bloem

Bloem hat

Bloem is a cute hat with stranded color work depicting little flowers. With only two colors, this hat knits up super quick and is a great first stranded project for anyone who has never attempted this technique before.

The Bloem hat pattern contains instructions for a whopping 9 sizes, ranging from Preemie to Adult Large. The Bloem hat is completely seamless and knitted from the bottom up. The color work pattern for the body of the hat is provided charted only. All other instructions are in written form.


Pay what you want: (minimum €4.90)

Add to cart


Difficulty level

Bloem is seamless and knit in the round from the bottom up. This pattern involves following a color chart and working in stranded knitting. An alternative technique for creating the design is to duplicate stitch this design onto the hat after knitting.

Stitches used include knit, purl, k2tog and the M1 increase. This pattern is suitable for the intermediate knitter.

Size and finished measurements

Preemie (Newborn, 6M Baby, 12M Baby, Toddler) {Child, S, M, L} with resulting circumference of approx. 30 (37, 40.5, 44.5, 48.5) {51.5, 54, 55, 59} cm (11 ¾ (14 ½, 16, 17 ½, 19) {20 ¼, 21 ¼, 21 ¾, 23 ¼} inches) in the body of the hat.

When choosing your hat size, take 2.5-5 cm (1-2 inches) of negative ease into account.

Pattern details

  • Gauge: 22 sts / 24 rounds = 10 cm (4 inches) over stranded stockinette on larger needles.
  • Pattern languages included: English and Dutch (Dit patroon omvat zowel een Nederlandse als een Engelse versie).
  • Digital PDF has 4 pages (letter size).

Materials

  • Yarn: GGH Maxima [100% merino wool; 111 m (121 yds) / 50 g] in 2 colors:
    MC: 29 (49, 59, 68, 76) {93, 111, 121, 140) m (32 (54, 64, 75, 82) {102, 121, 131, 152} yds)
    CC: 40 (47, 47, 49, 49) {51, 60, 60, 62} m (44 (51, 51, 53, 53) {56, 65, 65, 68} yds)
    Substitute any DK weight yarn for a similar result.
  • Knitting needles in your preferred style for small circumference knitting in the round in the following sizes (or to match gauge): Size 3.5 mm (US 4) and size 4 mm (US 6)
  • Yarn needle
  • 7 stitch markers
  • 1 differently colored end-of-round stitch marker

bloem Read More »

robijn in ‘handwerken zonder grenzen’

Robijn by La Visch Designs

The Robijn lacy wrap is designed to give an extra bit of glamour to your outfit. Great for that special night out! Robijn can be made as a scarf or stole. The width and length are easily adjusted for further customization. This design is suitable for any drapey lace-weight or fingering-weight yarn.

Cover of Handwerken Zonder Grenzen 198

I’m proud to tell you, that this design has been published in issue 198 of the Dutch magazine Handwerken Zonder Grenzen! You can order this issue in Dutch here.

This pattern is also available in both English and Dutch through La Visch Designs!

Robijn - a design by La Visch Designs

robijn in ‘handwerken zonder grenzen’ Read More »

robijn

Robijn - a design by La Visch Designs

This lacy wrap is designed to give an extra bit of glamour to your outfit on that special night out. Robijn can be made as a scarf or stole, the width and length are easily adjusted for further customization This design is suitable for any drapey lace-weight or fingering-weight yarn. Robijn has also been published in issue 198 of the Dutch magazine Handwerken Zonder Grenzen! You can order this issue in Dutch here.

The body of this shawl has an easy-to-remember two-row repeat which makes it a great traveling project. The instructions are both fully charted and written out.
This pattern uses standard American English crochet terminology.


Pay what you want: (minimum €6.50)

Add to cart


Difficulty level

Stitches used within this pattern are of sc, dc, slst and ch st.
This pattern is suitable for the intermediate crocheter.

Size and finished measurements

Size S (L) – measurements after blocking: 26 (52) cm [10 ¼ (20 ½) inches] wide and 153 cm (60 ¼ inches) long.

Pattern details

  • Gauge is not critical with this design, for the sample stole: 18.5 sts and 7.5 rows = 10 cm / 4 inches over lace pattern after blocking.
  • Pattern languages included: English and Dutch (Dit patroon omvat zowel een Nederlandse als een Engelse versie).
  • Digital PDF has 4 pages (letter size).

Materials

  • 250 (505) m or 275 (552) yds lace-weight yarn. The sample is in Diversan Tencel [100% Tencel; 777 m (850 yds) / 100 g] in Rio Red. Substitute a smooth silk, cotton or viscose for a similar result.
  • For the sample Robijn Stole a 5 mm (US size G/8) hook was used.
  • Yarn needle.

robijn Read More »

framboos

Framboos

Framboos is a crescent-shaped shawl worked from the top-down. Its stockinette body will let that special skein of fingering weight yarn shine. The lace edging with its lovely picot finishing makes this shawl a true stunner.

The shawl is started with a garter stitch tab, the lace in the border is knit on both right side and wrong side rows. The instructions for the border of the shawl are provided both fully charted and written out. Instructions for changing the size of the shawl are also included.


Pay what you want: (minimum €6.50)

Add to cart


Difficulty level

The shawl is started with a garter stitch tab in combination with a provisional cast on. Stitches used include knit, purl, k2tog, skp, yo and double yo. This pattern is suitable for the intermediate to advanced knitter.

Size and finished measurements

Finished dimensions of the sample shawl: Wingspan of 160 cm (63 inches) and a depth of 47 cm (18 ½ inches), measured after blocking.

Pattern details

  • Written for a gauge of 16 sts / 23 rows = 10 cm (4 inches) over stockinette after blocking. Gauge is not critical for this design, but a loose gauge is strongly advised.
  • Pattern languages included: English and Dutch (Dit patroon omvat zowel een Nederlandse als een Engelse versie).
  • Digital PDF has 4 pages (letter size).

Materials

  • 415 m (454 yds) / 100 g Araucania Huasco / Botany Lace [100% merino wool]. Substitute any wool fingering weight yarn for a similar result.
  • Size 4 mm (US 6) / 80 cm (32 inches) circular needles.
  • Waste yarn for provisional cast on.
  • Yarn needle.
  • 41 stitch markers (optional).

framboos Read More »

stellaria cowl

by La Visch Designs

The Stellaria Cowl was inspired by a desire to use up various odds and ends of the lovely rustic yarn by Moeke Yarns. Named for the tiny flowers in the design, this cowl is an entertaining and relaxing knit.

This cowl is knit in the round, with easy jog-less striping and flower texture stitch pattern. Included in the pattern is a photo tutorial on how to work the flower stitch. Available in two sizes, the Stellaria Cowl is bound to become a favorite to make, wear and gift!


Pay what you want: (minimum €5.50)

Add to cart


Size and finished measurements

The Stellaria Cowl is available in 2 sizes, S (L), the cowl pictured is size S. Finished dimensions: height of 42.5 cm (16 ¾ inches) and 73 (93) cm (28 ¾ (36 ½) inches) circumference, measured after blocking.

Difficulty

This cowl is knit in the round. Stitches used include knit, purl, skp and k2tog. The pattern is suitable for the intermediate knitter.

Pattern details

  • Worked in the round.
  • Gauge is not critical in this design. For the sample cowl: 18 sts / 27 rows = 10 cm (4 inches) over stockinette in the stripe section, measured after blocking.
  • Pattern languages included: English and Dutch (Dit patroon omvat zowel een Nederlandse als een Engelse versie).
  • Digital PDF has 4 pages (letter size).

Materials

  • Yarn: Moeke Yarns Elena (100% wool; 330 m (361 yds) / 100 g) in the following colors and amounts:
    Color A: 73 (93) m (79 (101) yds) / 22 (28) g in Gray
    Color B: 195 (250) m (214 (273) yds) / 60 (76) g in Natural
    Color C: 102 (130) m (111 (141) yds) / 31 (40) g in Dark Coral
  • A 4 mm (US 6) circular needle, 60 cm (24 inches) length.
  • Yarn needle.
  • 1 “end-of-round” stitch marker

stellaria cowl Read More »

luule

Luule by La Visch Designs

Luule means “poetry” in Estonian. The Luule stole was designed for and dedicated to my mother, because she wanted to knit pretty lace. The delicate lace is based on traditional Estonian stitch patterns, knit on both right and wrong sides of the fabric and include nupps. Instructions for both traditional and easy nupps are included.

This shawl begins with a provisional cast on followed by a lovely leaf lace edging and border. After the provisional cast on has been undone, the center is filled with diamond lace. The top edge mirrors the bottom. The instructions for the shawl are provided both fully charted and written out.


Pay what you want: (minimum €6.50)

Add to cart


Size and finished measurements

One size – finished dimensions: 58 cm (23 inches) wide and 180 cm (71 inches) long, measured after blocking.

Difficulty

This stole starts with a provisional cast on and contains lace patterning on both right and wrong sides of the fabric. Stitches used include knit, purl, k2tog, k3tog, skp, yo, p2tog, a centered double decrease (sl2-k1-p2sso), Estonian 3 into 3 gathered stitches and nupps.
This pattern is suitable for the advanced knitter.

Pattern details

  • Worked flat back and forth.
  • For the sample shawl measured after blocking: 19.2 sts / 24 rows = 10 cm (4 inches) over the body in Diamonds pattern. Gauge is however not critical for this design, the lace will open up after blocking.
  • Pattern languages included: English and Dutch (Dit patroon omvat zowel een Nederlandse als een Engelse versie).
  • Digital PDF has 4 pages (letter size).

Materials

  • Yarn: 800 m (875 yds) Garnstudio Drops Lace [70% alpaca, 30% silk; 400 m (438 yds) per 50 g]. Substitute any lace weight yarn of comparable thickness for a similar result
  • Knitting needles in your preferred style in size 3.5 mm (US 4).
  • Yarn needle
  • Waste yarn for provisional cast on
  • 11 stitch markers (optional)
  • Crochet hook in a size equivalent to the size of your knitting needles (optional, for easy nupps)

luule Read More »

cinematic

Cinematic by La Visch Designs

Cinematic is a simple but stylish triangular shawl knit sideways in garter stitch. With it’s generous size of 215 cm (84 ½ inches) along the upper edge and a depth of 52 cm (20 ½ inches) it is perfect to wear as an elegant scarf.

Eyelet rows and stripes in a contrast color, combined with a gradient yarn, make for a highly customizable accessory. Wear it with a shirt and jeans for a casual look or with that little back dress for a more dramatic look.


Pay what you want: (minimum €6.50)

Add to cart


Size and finished measurements

Finished dimensions of the sample Cinematic shawl: 215 cm (84 ½ inches) along the upper edge and a depth of 52 cm (20 ½ inches), measured after blocking.

Difficulty

Stitches used include knit, purl, yo, k2tog and kfb. This pattern is suitable for the beginning to intermediate knitter.

Pattern details

  • Worked flat back and forth.
  • Gauge is not critical in this design but should be on the loose side. For the sample shawl measured after blocking: 16 sts / 34 rows = 10 cm (4 inches) in garter stitch.
  • Pattern languages included: English and Dutch (Dit patroon omvat zowel een Nederlandse als een Engelse versie).
  • Digital PDF has 2 pages for the English version and 3 pages for the Dutch version (A4 size).

Materials

  • Yarn: MC: 460 m (503 yds) / 100 g Uilenstad Swifter Sokkenwol [75% Wool, 25% polyamide] in “Sweet Pink”.  CC: 210 m (230 yds) / 50 g Sockenwolle Treviso [75% Wool, 25% polyamide] in gray. Substitute any fingering weight yarn in a gradient for the MC and any solid color for the CC for a similar result.
  • Size 4 mm (US 6) / 80 cm (32 inches) circular needles were used for the sample shawl.
  • Yarn needle

cinematic Read More »